GW Instek Frequency Generators

GW Instek - AFG-2225

GW Instek is launching AFG-2225, its first basic level dual-channel arbitrary function generator, which provides superior features in its class. Both channels are equipped with same characteristics to fit dual-signal applications such as differential or IQ signaling. The outstanding cost-performance value makes the AFG-2225 a practical instrument to accelerate the development process.
The major features for both channels include 10Vpp output amplitude; 25MHz frequency bandwidth with 1uHz resolution; built-in waveforms of Sine, Square, Ramp (Triangle) and Noise. As to the 1%~99% adjustable duty cycle of Square waveform can be used as pulse signal sources. For the arbitrary waveform, user can edit the 66 built-in waveforms or create a whole new one. Moreover, AFG-2225 carries features of AM/FM/PM/FSK/SUM Modulation, Sweep, Burst and Frequency Counter, which can be applied to various communication fields.
In addition to the intuitive and friendly user interface, the 3.5-inch color LCD displays the comprehensive operation information including the true waveform presented at the output. USB Host and Device interfaces are equipped to link the AFG-2225 with other devices, which provide the flexibility of waveform generation for more practical usages. With link to GW Instek GDS-series Digital Storage Oscilloscopes (DSOs), the waveforms of interest can be captured and reconstructed. User can also use the arbitrary waveform PC software to edit the waveform and then send to AFG-2225 directly, or save the waveform into flash drive and then transfer to AFG-2225.

Features:
- Wide Frequency Ranges From 1μHz to 25MHz (sine/square wave)
- 1 μHz Resolution in Full Range
- Built-in Standard 120MSa/s, 10bit, 4k Points Arbitrary Waveform for Both Channels
- True Dual-Channel Output, CH2 Provides the Same Characteristics as CH1
- Couple, Tracking, Phase Operations of Dual Channel are Supported
- 1% ~ 99% Adjustable Duty Cycle for Square Waveform
- High Resolution and Colored TFT LCD with Friendly User Interface
- Multiple Editing methods to Edit Arbitrary Waveform Easily
- Built-in Standard AM/FM/PM/FSK/SUM/Sweep/Burst and Frequency Counter
- USB Host/Device Interface for Remote Control and Waveform Editing

GW Instek - AFG-3021

The AFG-3000 series arbitrary function generators include 20MHz/30MHz single channel and dual channel models, designed to meet industry, scientific research, and education applications. In the design of isolated output, all output channels are earth ground isolation, which is suitable for test applications of floating circuit. For instance, connecting an AFG-3000 with a power supply’s DC voltage, the maximum AC-DC cascaded output reaches +42V or -42V. Each channel of dual channel models can be operated independently or multi-units can simultaneously function without taking grounding reference into consideration. Applications are, for instance, the ignition control or transmission device of automotive electronics. The series features sample rate of 250MSa/s, 16-bit resolution, and 8M point memory depth for arbitrary waveform generation. Users not only can save the edited waveforms to the memory to build arbitrary waveforms, but also rebuild waveforms by the AFG-3000’s built-in DSOLink function with a GW Instek digital storage oscilloscope.
The AFG-3000 series supports synchronized phase for multi channel operation up to 6 units and 12 channels. A reference input connector is available allowing an external 10 MHz time base to synchronize the internal clock and elevate the frequency output accuracy. The series supports frequency sweep and amplitude sweep that can also integrate other functions, including linear/logarithm, one-way (saw tooth)/two-way (triangle), continuous/single trigger/gated trigger to meet various application requirements by applying different sweep methods. Frequency sweep tests the frequency response of electronic components such as filter and low frequency amplifier. Amplitude sweep simulates vibration tests (requires a vibration tester), and it also conducts aging tests of various materials and linearity tests of low frequency amplifier.
The main features of the AFG-3000 series include output amplitude from 1mVpp to 10Vpp (connected with a 50 ohm load); frequency range from 1uHz to 20MHz or 30MHz; 1uHz frequency resolution; and built-in sine, square, pulse, triangle, ramp, DC voltage, harmonic and noise. The waveform width, rise edge time and fall edge time of pulse waveform can be adjusted flexibly. Pulse waveform, with duty cycle from 0.017% to 99.983%, can be applied as trigger signals. Users can conduct arbitrary editing via 65 built-in function waveforms. The series supports AM/FM/PM/FSK/PWM modulation, frequency sweep, amplitude sweep and burst to satisfy industrial application requirements. Dual channel models provide SUM modulation, coupling, tracking, and phase to meet the test requirements of differential signal, phase control and amplifier distortion. Built-in 8th harmonic signal generator simulates harmonic signal of switching power supplies and it also tests EMI power filter characteristics. The AFG-3000 series provides free arbitrary waveform editing software (AWES) for users to quickly edit waveforms from the built-in diagrams so as to execute measurements.

Features:
- 1uHz to 20 or 30MHz, 16-bit resolution with 1 mVpp to 10 Vpp amplitude. 1 or 2 channel (s)
- 250 MSa/s sampling rate for higher time resolution arbitrary waveforms
- 8M Points/channel standard waveform memory
- Input/output signal ground independent of housing and signal ground between channels also insulated.
- Synchronized phase operates up to 6 units and 12 channels
- Pulse waveform parameters can be set independently for more precise timing
- Harmonic signal generator
- Dual channel models support SUM modulation, coupling, tracking, and phase functions
- Built-in AM/FM/PM/FSK/PWM/SUM modulation, sweep and burst functions
- Provide USB/LAN/GPIB (optional) instrument control interface
- IQ baseband waveform output function for AFG-3032/3022

GW Instek - AFG-2225

GW Instek is launching AFG-2225, its first basic level dual-channel arbitrary function generator, which provides superior features in its class. Both channels are equipped with same characteristics to fit dual-signal applications such as differential or IQ signaling. The outstanding cost-performance value makes the AFG-2225 a practical instrument to accelerate the development process.
The major features for both channels include 10Vpp output amplitude; 25MHz frequency bandwidth with 1uHz resolution; built-in waveforms of Sine, Square, Ramp (Triangle) and Noise. As to the 1%~99% adjustable duty cycle of Square waveform can be used as pulse signal sources. For the arbitrary waveform, user can edit the 66 built-in waveforms or create a whole new one. Moreover, AFG-2225 carries features of AM/FM/PM/FSK/SUM Modulation, Sweep, Burst and Frequency Counter, which can be applied to various communication fields.
In addition to the intuitive and friendly user interface, the 3.5-inch color LCD displays the comprehensive operation information including the true waveform presented at the output. USB Host and Device interfaces are equipped to link the AFG-2225 with other devices, which provide the flexibility of waveform generation for more practical usages. With link to GW Instek GDS-series Digital Storage Oscilloscopes (DSOs), the waveforms of interest can be captured and reconstructed. User can also use the arbitrary waveform PC software to edit the waveform and then send to AFG-2225 directly, or save the waveform into flash drive and then transfer to AFG-2225.

Features:
- Wide Frequency Ranges From 1μHz to 25MHz (sine/square wave)
- 1 μHz Resolution in Full Range
- Built-in Standard 120MSa/s, 10bit, 4k Points Arbitrary Waveform for Both Channels
- True Dual-Channel Output, CH2 Provides the Same Characteristics as CH1
- Couple, Tracking, Phase Operations of Dual Channel are Supported
- 1% ~ 99% Adjustable Duty Cycle for Square Waveform
- High Resolution and Colored TFT LCD with Friendly User Interface
- Multiple Editing methods to Edit Arbitrary Waveform Easily
- Built-in Standard AM/FM/PM/FSK/SUM/Sweep/Burst and Frequency Counter
- USB Host/Device Interface for Remote Control and Waveform Editing

GW Instek - AFG-3022

The AFG-3022 dual-channel 20 MHz arbitrary function generator is designed to meet industry, scientific research, and education applications. In the design of isolated output, all output channels are earth ground isolation, which is suitable for test applications of floating circuit. For instance, connecting an AFG-3022 with a power supply’s DC voltage, the maximum AC-DC cascaded output reaches +42V or -42V. Each channel of AFG-3022 can be operated independently or multi-units can simultaneously function without taking grounding reference into consideration. Applications are, for instance, the ignition control or transmission device of automotive electronics. Device features sample rate of 250MSa/s, 16-bit resolution, and 8M point memory depth for arbitrary waveform generation. Users not only can save the edited waveforms to the memory to build arbitrary waveforms, but also rebuild waveforms by the AFG-3000’s built-in DSOLink function with a GW Instek digital storage oscilloscope.

Key features

• 1 uHz to 20 MHz, 16-bit resolution with 1 mVpp to 10 Vpp amplitude, 2 channels
• 250 MSa/s sampling rate for higher time resolution arbitrary waveforms
• 8 M Points/channel standard waveform memory
• Input/output signal ground independent of housing and signal ground between channels also insulated
• Synchronized phase operates up to 6 units and 12 channels
• Pulse waveform parameters can be set independently for more precise timing
• Harmonic signal generator
• Support SUM modulation, coupling, tracking, and phase functions
• Built-in AM / FM / PM / FSK / PWM / SUM modulation, sweep and burst functions
• Provide USB / LAN / GPIB (optional) instrument control interface
• IQ baseband waveform output function

GW Instek - AFG-3031

The AFG-3031 single-channel 30 MHz arbitrary function generator is designed to meet industry, scientific research, and education applications. In the design of isolated output, multi-units can simultaneously function without taking grounding reference into consideration. Applications are, for instance, the ignition control or transmission device of automotive electronics. Device features sample rate of 250MSa/s, 16-bit resolution, and 8M point memory depth for arbitrary waveform generation. Users not only can save the edited waveforms to the memory to build arbitrary waveforms, but also rebuild waveforms by the AFG-3000’s built-in DSOLink function with a GW Instek digital storage oscilloscope.

Features and specifications:
 - 1uHz to 30 MHz, 16-bit resolution with 1 mVpp to 10 Vpp amplitude, 2 channels;
 - 250 MSa/s sampling rate for higher time resolution arbitrary waveforms;
 - 8M Points/channel standard waveform memory;
 - Input/output signal ground independent of housing is insulated;
 - Synchronized phase operates up to 6 units;
 - Pulse waveform parameters can be set independently for more precise timing;
 - Harmonic signal generator;
 - Support SUM modulation, coupling, tracking, and phase functions;
 - Built-in AM/FM/PM/FSK/PWM/SUM modulation, sweep and burst functions;
 - Provide USB/LAN/GPIB (optional) instrument control interface;
 - IQ baseband waveform output function.

GW Instek - AFG-3032

The AFG-3032 dual-channel 30 MHz arbitrary function generator is designed to meet industry, scientific research, and education applications. In the design of isolated output, all output channels are earth ground isolation, which is suitable for test applications of floating circuit. For instance, connecting an AFG-3032 with a power supply’s DC voltage, the maximum AC-DC cascaded output reaches +42V or -42V. Each channel of AFG-3022 can be operated independently or multi-units can simultaneously function without taking grounding reference into consideration. Applications are, for instance, the ignition control or transmission device of automotive electronics. Device features sample rate of 250MSa/s, 16-bit resolution, and 8M point memory depth for arbitrary waveform generation. Users not only can save the edited waveforms to the memory to build arbitrary waveforms, but also rebuild waveforms by the AFG-3000’s built-in DSOLink function with a GW Instek digital storage oscilloscope.

Key features

• 1 uHz to 30 MHz, 16-bit resolution with 1 mVpp to 10 Vpp amplitude, 2 channels
• 250 MSa/s sampling rate for higher time resolution arbitrary waveforms
• 8 M Points/channel standard waveform memory
• Input/output signal ground independent of housing and signal ground between channels also insulated
• Synchronized phase operates up to 6 units and 12 channels
• Pulse waveform parameters can be set independently for more precise timing
• Harmonic signal generator
• Support SUM modulation, coupling, tracking, and phase functions
• Built-in AM / FM / PM / FSK / PWM / SUM modulation, sweep and burst functions
• Provide USB / LAN / GPIB (optional) instrument control interface
• IQ baseband waveform output function

GW Instek - AFG-3051

The AFG-3051 is arbitrary waveform generator designed for industrial, scientific research and educational applications. It comes with bandwidth of 50 MHz with built-in multiple standard waveforms to meet users' diversified needs.

The AFG-3051 also provides a high 16-bit resolution, 200MSa/s sample rate and a 1M memory depth for editing arbitrary waveforms directly through the intuitive user interface. The Direct Waveform Reconstruction (DWR) function enables users to directly import waveforms from a GDS-2000 Series oscilloscope to the AFG-3051 via USB host, allowing users to edit waveforms and enhance measurement efficiency.

In addition, the AFG-3051 has switchable 50 Ohm and Hi-Z Impedances, built-in On-Screen Help for operation conveniently. Complete parameter settings and waveform can be displayed through 4.3-inch high-resolution TFT LCD. Through USB, RS-232, and GPIB, users can use dedicated PC software or IEEE488.2 commands to edit waveforms.

Key features

• Wide frequency range from 1 uHz to 50 MHz
• High 200 MSa/s sampling rate
• 16-bit Amplitude Resolution
• Output from any section of 1M-point-long waveform
• 4.3" high-resolution LCD display/on-screen help/Impedance switch
• Four ways to generate arbitrary waveform: Front Panel Operation
• CSV file uploading, Direct Waveform Reconstruction (DWR), Arbitrary
• Waveform Editing PC Software
• USB, RS-232, GPIB interface support

GW Instek - AFG-3081

The AFG-3081 is arbitrary waveform generator designed for industrial, scientific research and educational applications. It comes with bandwidth of 80 MHz with built-in multiple standard waveforms to meet users' diversified needs.

The AFG-3081 also provides a high 16-bit resolution, 200MSa/s sample rate and a 1M memory depth for editing arbitrary waveforms directly through the intuitive user interface. The Direct Waveform Reconstruction (DWR) function enables users to directly import waveforms from a GDS-2000 Series oscilloscope to the AFG-3081 via USB host, allowing users to edit waveforms and enhance measurement efficiency.

In addition, the AFG-3081 has switchable 50 Ohm and Hi-Z Impedances, built-in On-Screen Help for operation conveniently. Complete parameter settings and waveform can be displayed through 4.3-inch high-resolution TFT LCD. Through USB, RS-232, and GPIB, users can use dedicated PC software or IEEE488.2 commands to edit waveforms.

Features and specifications:
 - Wide frequency range from 1 uHz to 80 MHz;
 - High 200MSa/s sampling rate;
 - 16-bit Amplitude Resolution;
 - Output from any section of 1M-point-long waveform;
 - 4.3" high-resolution LCD display/on-screen help/Impedance switch;
 - Four ways to generate arbitrary waveform: Front Panel Operation; 
 - CSV file uploading, Direct Waveform Reconstruction (DWR), Arbitrary;
 - Waveform Editing PC Software;
 - USB, RS-232, GPIB interface support.

GW INSTEK - MFG-2110

The MFG-2000 series is multi-channel function generator, including MFG-21XX entry-level models and MFG-22XX advanced models.

MFG-2110 model outputs have single-channel 10MHz Arbitrary Function Generator and 25MHz pulse generator.

The AFG channel of the MFG-2110 outputs sine, square, and triangle, etc. The series features true point by point output arbitrary waveform characteristics of 200MSa/s sample rate, 100MHz waveform repetition rate, 14-bit resolution, and 16k points memory depth.

GW INSTEK - MFG-2120MA

The MFG-2000 series is multi-channel function generator, including MFG-21XX entry-level models and MFG-22XX advanced models.

MFG-2120MA model outputs have single-channel 20MHz Arbitrary Function Generator, 25MHz pulse generator and power amplifier.

The AFG channel of the MFG-2120MA outputs sine, square, and triangle, etc. The series features true point by point output arbitrary waveform characteristics of 200MSa/s sample rate, 100MHz waveform repetition rate, 14-bit resolution, and 16k points memory depth.

GW INSTEK - MFG-2130M

The MFG-2000 series is multi-channel function generator, including MFG-21XX entry-level models and MFG-22XX advanced models.

MFG-2130M model outputs have single-channel 30MHz Arbitrary Function Generator and 25MHz pulse generator.

The AFG channel of the MFG-2130M outputs sine, square, and triangle, etc. The series features true point by point output arbitrary waveform characteristics of 200MSa/s sample rate, 100MHz waveform repetition rate, 14-bit resolution, and 16k points memory depth.

GW INSTEK - MFG-2160MF

The MFG-2000 series is multi-channel function generator, including MFG-21XX entry-level models and MFG-22XX advanced models.

MFG-2160MF model outputs have single-channel 60MHz Arbitrary Function Generator, 25MHz pulse generator and 160MHz RF Signal Generator.

The AFG channel of the MFG-2160MF outputs sine, square, and triangle, etc. The series features true point by point output arbitrary waveform characteristics of 200MSa/s sample rate, 100MHz waveform repetition rate, 14-bit resolution, and 16k points memory depth.

GW INSTEK - MFG-2160MR

The MFG-2000 series is multi-channel function generator, including MFG-21XX entry-level models and MFG-22XX advanced models.

MFG-2160MR model outputs have single-channel 60MHz Arbitrary Function Generator, 25MHz pulse generator and 320MHz RF Signal Generator.

The AFG channel of the MFG-2160MR outputs sine, square, and triangle, etc. The series features true point by point output arbitrary waveform characteristics of 200MSa/s sample rate, 100MHz waveform repetition rate, 14-bit resolution, and 16k points memory depth.

GW INSTEK - MFG-2260M

The MFG-2000 series is multi-channel function generator, including MFG-21XX entry-level models and MFG-22XX advanced models.

MFG-2260M model outputs have double-channel 60MHz Arbitrary Function Generator and 25MHz pulse generator.

The AFG channel of the MFG-2260M outputs sine, square, and triangle, etc. The series features true point by point output arbitrary waveform characteristics of 200MSa/s sample rate, 100MHz waveform repetition rate, 14-bit resolution, and 16k points memory depth.

GW INSTEK - MFG-2230M

The MFG-2000 series is multi-channel function generator, including MFG-21XX entry-level models and MFG-22XX advanced models.

MFG-2230M model outputs have double-channel 30MHz Arbitrary Function Generator and 25MHz pulse generator.

The AFG channel of the MFG-2230M outputs sine, square, and triangle, etc. The series features true point by point output arbitrary waveform characteristics of 200MSa/s sample rate, 100MHz waveform repetition rate, 14-bit resolution, and 16k points memory depth.

GW INSTEK - MFG-2260MFA

The MFG-2000 series is multi-channel function generator, including MFG-21XX entry-level models and MFG-22XX advanced models.

MFG-2260MFA model outputs have double-channel 60MHz Arbitrary Function Generator, 25MHz pulse generator, 160MHz RF Signal Generator and Power Amplifier.

The AFG channel of the MFG-2260MFA outputs sine, square, and triangle, etc. The series features true point by point output arbitrary waveform characteristics of 200MSa/s sample rate, 100MHz waveform repetition rate, 14-bit resolution, and 16k points memory depth.

GW INSTEK - MFG-2260MRA

The MFG-2000 series is multi-channel function generator, including MFG-21XX entry-level models and MFG-22XX advanced models.

MFG-2260MRA model outputs have double-channel 60MHz Arbitrary Function Generator, 25MHz pulse generator, 320MHz RF Signal Generator and Power Amplifier.

The AFG channel of the MFG-2260MRA outputs sine, square, and triangle, etc. The series features true point by point output arbitrary waveform characteristics of 200MSa/s sample rate, 100MHz waveform repetition rate, 14-bit resolution, and 16k points memory depth.

GW INSTEK - MFG-2220HM

The MFG-2000 series is multi-channel function generator, including MFG-21XX entry-level models and MFG-22XX advanced models.

MFG-2220HM model outputs have double-channel 200MHz Arbitrary Function Generator and 25MHz pulse generator.

The AFG channel of the MFG-2220HM outputs sine, square, and triangle, etc. The series features true point by point output arbitrary waveform characteristics of 250MSa/s sample rate, 125MHz waveform repetition rate, 14-bit resolution, and 16k points memory depth.